• Bowl From A Board Easy Cut System +

• Parting Tool With Handle +

• 12" Lathe Mounted Disk Sander+

• Rubber Sanding Disk Cleaner

If purchased separately $316.96

Brought to you from Ron Brown's Best,LLC

This Easy Cut System eliminates about 90% of the cutting and gluing associated with traditional segmented construction. Depending on how you construct your board, the end results can be spectacular. There are many fine videos on YouTube with instructions for gluing up your starting blank.

I designed the Bowl From A Board Easy Cut System to be quick and easy to set up and use. I recommend using the narrowest parting tool you can find, typically 1/16" to 3/32". It really makes a difference in how the rings stack together. The thin parting tool will yield maximum wall thickness.

The attached video provides valuable insight for setting up and using this new system successfully. 

Although you can use boards thinner than 3/4", we believe you will have better success using material from 3/4" to 1" to begin with. After you have had some practice, experiment with thicker or thinner material. 

You can also use different angles on the same board. For Example: 1st ring cut 45 degrees, 2nd ring cut 55 degrees, third cut (base) 60 degrees will yield a bow with more of a traditional curve rather than straight sides.

NOTE: The parting tool will be perpendicular to the template. Set up as directed in the video and you will be amazed at how quick and easy it is to use your Bowl From A Board Easy Cut System. 

Each system will need a post to fit your lathe banjo. I know the specs for most common lathes so if you provide the brand and model number, that is usually all I need. If I need more info, I'll contact you.

If you have any questions, call us at (770) 962-3821 during normal business hours Eastern time zone.

Does not include the finished bowl shown.