Glue Press for Bowl From A Board and Segmented Rings

From Ron Brown’s Best, LLC

Why you need a Glue Press:

These glue presses are perfect for Bowls From A Board as well as traditional Segmented Ring Projects. With clamps at all four corners and flat rigid clamping cauls, even pressure is applied across the surface of each ring for perfect glue joints.

HDPE is known for its non-stick ability as any glue squeeze-out will easily just flake off with little effort. This material is resistant to warping, chemicals, and temperature changes. This unit should last for a lifetime of use when used according to instructions and stored properly.

We have sizes compatible with most segmented projects:

Six Configurations:

10” x 10” – Diameter – Height

10” x 20” – Diameter – Height

14” x 10” – Diameter – Height

14” x 20” – Diameter – Height

16" x 10" – Diameter – Height

16" x 20" – Diameter – Height

Each Press comes with a 5/8” thick HDPE base and top. It has 4 bolts, 4 Five-Star Knobs, and associated nuts and washers.

If you have any questions or special requests, don't hesitate to contact us at (770) 962-3821.